Services Process Gallery Reviews FAQ Book Now
Shortstop Tint window tinting in Philadelphia, PA
Back Philadelphia, PA

Automotive Window Tint

Full vehicle tint in carbon or ceramic, cut to spec and installed clean with no bubbles.

Get a free estimateTell us your number and we will call you back.

What this covers

About automotive window tint.

Shortstop Tint does car, truck and SUV tint at the shop on Pickwick Street, just off I-95. You pick carbon or ceramic film before anything goes on, every window is cut to fit your glass, and the goal is a cooler cabin and less glare with no bubbles or lifted edges.

Car tint is sold by a number called VLT, visible light transmission. It is the percentage of light that makes it through the glass with the film on. A 70% film is close to clear, a 35% film is a noticeable shade, and a 5% film is what people call limo tint. The lower the number, the darker the window. The factory glass already blocks a little light on its own, so the reading on the finished window is always a bit lower than the number on the film.

Darkness and heat rejection are two different things. Most of the heat you feel through a window comes from infrared light, which you cannot see. A film can be dark and still let a lot of that infrared through, or it can be light and block a good share of it. That is why the film type matters as much as the shade. Carbon film uses carbon particles for a matte, true black look that holds its color. Ceramic film is made to block more infrared at the same shade.

Every window on a car is shaped a little differently, especially the curved back glass. The film is cut to each window and heat shrunk to match the curve, so it lays flat without creases. Tint also holds shattered glass together better than bare glass, and it screens out the sun's UV, the thing that fades and cracks dashboards and seats over time.

01 / What We Do

Other Services

Automotive Window Tint

Full vehicle tint in carbon or ceramic, cut to spec and installed clean with no bubbles.

You’re viewing this

Ceramic Tint

Top tier heat rejection that keeps the cabin cool and the view clear without going limo dark.

Read more

Windshield & Sun Strips

Visor strips and full windshield film that kill the glare on long drives and low morning sun.

Read more

Residential Home Tint

Cuts heat and UV on home glass so your floors, furniture and power bill stop taking a beating.

Read more

Commercial & Office Tint

Storefronts, offices and glass doors for privacy, branding and real energy savings.

Read more

Tint Removal & Re-Tint

Old bubbling or purple film stripped off clean, the glass polished, and redone properly.

Read more

Not sure where to start? Get a free estimate →

02 / Get a Quote

Free estimate,
no pressure.

Free estimates, no obligation
Locally owned, open 7 days a week
Prefer to call? (267) 897-1679

Get your free estimate

No spam. Your number is only used to get back to you.

03 / FAQ

Automotive Window Tint, answered.

It depends on the vehicle. On a sedan or coupe, Pennsylvania requires every window to let at least 70% of light through. On SUVs, pickups and vans, the rear side windows and back glass have no limit, while the windshield and front side windows still have to pass 70%. We go over the options for your vehicle before any film is cut.

A full car is usually 2 to 4 hours, and two front windows about an hour.

Yes, you drive it home the same day. Leave the windows rolled up for the next few days while the film cures.

It is how much visible light gets through. A higher number is lighter and a lower number is darker. 70% is close to clear, 5% is limo dark.

No. Most of the heat comes from infrared light you cannot see, and how much of it a film blocks depends on the film type, not just the shade. A light ceramic film can run cooler than a dark basic film.

Yes. Film screens out nearly all UV, and UV is what fades and dries out dashboards, seats and trim.

Book Free Estimate